Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Results 1 to 2 of 2

Thread: Q on tail light wire in rudder---

  1. #1

    Join Date
    Feb 2021
    Posts
    35
    Post Thanks / Like

    Default Q on tail light wire in rudder---

    I am about to finish repairs to to my rudder----
    I am thinking about the light wire---- I would think I dont want it laying loose inside the fabric when I am attaching the fabric--- im thinking that I wouldnt want the wire to get up against the fabric when in=m putting the glue in the fabric.

    So im wondering about adding something to attach the wire to ----
    was thinking about a welding rod that could get welded end at each end like the rods piper used in the tail feathers----

    is there a way this is done ?
    I guess I could wait till the fabric is glued on to put in the wire---- fish the wire through-- but it hass to go through the round holes in the rib--- which might be hard to hit going through the light housing-----

    Tim

  2. #2
    Wag-builder's Avatar
    Join Date
    Jan 2015
    Location
    Livingston, TN
    Posts
    269
    Post Thanks / Like

    Default Re: Q on tail light wire in rudder---

    Piper taped the wire to the rib before covering the rudder.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •