Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: tripacer fuselage drawings

  1. #1
    gliderman's Avatar
    Join Date
    Jan 2009
    Red Deer,AB Canada
    Post Thanks / Like

    Default tripacer fuselage drawings

    Hi All

    As you probably know my old Tripacer is now a Innisfail Flying Club Project. The IFC got it back from the gentleman who bought it from the insurance company. because of his inability to cross the Border due to Cov-id, he was unable to collect it and a deal was made to sell it back to us.

    so as it is now a Club project, we have 21 Chiefs and 1 Indian(me). We were in the club hangar today making workbenches and shelves for the Tripacer parts to be stored as we work on it. so of course everyone has an opinion and I had to walk away and bite my tongue a few times. silly people.... LOL

    we are going to have a real good look-see at the front area of the fuselage frame. the boot cowls have a couple of small wrinkles in them and the engine mount has a slight bend in one of the tubes.
    the question is does the CD have the dimensions needed to make sure everything is tickety-boo? I gave away my cd to the insurance company and never got it back( yah - now I'm the silly one)
    any words of wisdom

  2. #2
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Graham, Texas, United States
    Post Thanks / Like
    Blog Entries

    Default Re: tripacer fuselage drawings

    The drawing CD has the fuselage structure drawing and another drawing with all the fittings etc. I would not try a repair without that information.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts