Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Lycoming O-320-A2B

  1. #11

    Join Date
    Dec 2007
    Posts
    383
    Post Thanks / Like

    Default Re: Lycoming O-320-A2B

    Quote Originally Posted by Steve Pierce View Post
    You might find someone to coat them for experimental. I have changed probably 10 sets of cams and lifters in the last several years, it is a must do for me if the case is split.
    Thanks Steve. I have some time before the engine has to be done I will try to run some down in the meantime.
    DENNY

  2. #12

    Join Date
    Jan 2023
    Posts
    3
    Post Thanks / Like

    Default Re: Lycoming O-320-A2B

    Hello
    The case is on its way to Divco to get machined, the 3900$ 74166 cam will stay on the dealer shelve, I am going to get a 18840 from superior, airpower inc is beating up the canadian prices by quite a bit.
    I am looking t oget the DLC coated lifters any recommandation for these ?

    Thanks a lot for all these replies.

  3. #13
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Graham, Texas, United States
    Posts
    14,680
    Post Thanks / Like
    Blog Entries
    1

    Default Re: Lycoming O-320-A2B

    I have been getting the Lycoming cams and lifters from Air Power. Aircraft Spruce is a Lycoming dealer as well. I use the Lycoming cam and lifters. I can just hear a warranty issue mixing and matching manufacturers.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •