Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Thanks:
0
Likes:
0
-
SCAT tubing
Has anyone had custom SCAT ducts made with the sealed ends, and if you have, do you have the lengths required? I have measured ours twice but looking for a cross check.
Thanks,
N2709P
-
Re: SCAT tubing
What does a SCAT duct look like with a sealed end? Have always wondered as have never seen one ...
TonyN
-
Administrator
Re: SCAT tubing
Doesn't have the spiral wire in the ends where they fit over the tubes/ducts. Look like the ends were formed.
Formed stuff would be easier to work with and probably wear better. I keep 10 feet or so of SCEET and just cut to length as I need it on customer's aircraft but might be more prone to custom formed on my own.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote