Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Thanks:
0
Likes:
0
-
-
Re: Fuel Line Size for O-360
Congratulations Eddie - Steve Bryant
-
Re: Fuel Line Size for O-360
I bought two of the trimmer fuel valves directly from Maule for $84 each. They bolt right onto the same mount and the fittings are exactly the same with no mods. The two differences are a BOTH setting and the stem is longer so you can leave it or cut it them file the tip and tap it to get the leaver on.
-
Administrator
Re: Fuel Line Size for O-360
Is it a brass valve similar to the original?
-
Re: Fuel Line Size for O-360
Yes, it is brass and has the same fit, form, and function as the original, but has a "both" position.
-
Re: Fuel Line Size for O-360
Don't suppose you got a part number there do you Mr Pacer135?
-
Re: Fuel Line Size for O-360
The Trimmer fuel mod parts list calls out a Maule Fuel Valve 10049-E. This 10049-E part number is actually a series of fuel selector valves with each valve having a unique dash number (per my conversation with Maule when I ordered my valve). The correct Maule valve with the "Both" position is 10049-5.
-
Re: Fuel Line Size for O-360
The Maule number stamped on the valve is 10049E-5
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules