Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Landing gear fairing rubber channel

  1. #1

    Join Date
    Feb 2008
    Posts
    9
    Post Thanks / Like

    Default Landing gear fairing rubber channel

    Hi Guys, I am looking for the rubber moulding that goes around the fairings at the top of the gear legs.This is the fairing that you see where it rubs up along the side of the fuselage under the door. Piper # 13150-04
    Univair doesn't show it. I am not sure if Aircraft Spruce has it., if so which part # ? It has just a small bead that fits over the edge that shows and then goes down the back side approx 1/2 "
    Also , I am looking for a complete door lock assembly for the right side door for a PA 20/22
    Thanks Sam

  2. #2
    Andrew K's Avatar
    Join Date
    Apr 2008
    Location
    Dallas, TX
    Posts
    154
    Post Thanks / Like

    Default Re: Rubber Moulding

    Univair does claim to have it under part number 13150-004 (note the extra 0). Though for a piece of rubber $42 seems a little steep. I am new to ownership though so this might be how it goes, haha! I too need new ones.

  3. #3
    andya's Avatar
    Join Date
    Dec 2007
    Location
    UT47
    Posts
    1,994
    Post Thanks / Like

    Default Re: Rubber Moulding

    Aircraft Spruce, Wicks and other supply houses will have rubber material similar in size and shape that will work great an probably less cost than Univair.
    "Progress is our most important problem"

  4. #4

    Join Date
    Feb 2008
    Posts
    9
    Post Thanks / Like

    Default Re: Rubber Moulding

    Found it at Aircraft Spruce They call it d rubber moulding . I believe it as around $ .53 per ft/ Thanks Sam

  5. #5
    SuperPacer's Avatar
    Join Date
    Jan 2008
    Location
    Benson AZ, USA
    Posts
    414
    Post Thanks / Like

    Default Re: Rubber Moulding

    Sam,

    I was looking for some door parts in the UniVair cataloge and they do list a door look assembly, at $450.00 each!!! Probably better to watch E-Bay for conplete doors, I bought a set for $50.00 last year there.

    John Kobbeman
    SWPC Utah
    801 499-0413

  6. #6
    Rik's Avatar
    Join Date
    Feb 2014
    Location
    Lancaster CA
    Posts
    78
    Post Thanks / Like

    Default Landing gear fairing rubber channel

    What is used on the top of the fairing that goes between the fuselage and gear fairings on a PA22-160?

  7. #7
    51-pa22's Avatar
    Join Date
    Sep 2008
    Location
    Waxahachie, Texas
    Posts
    556
    Post Thanks / Like

    Default Re: Landing gear fairing rubber channel

    I believe....it is..

    My 51 used the same material as the leading edge wing root cuff and lower gear cover.
    let me see if I can find the part number.

    http://www.chiefaircraft.com/aircraf.../mau-a-10.html

    51-pa22.

    .

    MAU_A.jpg
    Last edited by 51-pa22; 03-03-2015 at 09:33 AM.

  8. #8
    51-pa22's Avatar
    Join Date
    Sep 2008
    Location
    Waxahachie, Texas
    Posts
    556
    Post Thanks / Like

    Default Re: Landing gear fairing rubber channel

    Lower gear cover
    Attached Images Attached Images

  9. #9
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Graham, Texas, United States
    Posts
    15,453
    Post Thanks / Like
    Blog Entries
    1

    Default Re: Landing gear fairing rubber channel

    I thought it was a "U" channel like 05-01400. http://www.aircraftspruce.com/catalo...s/uchannel.php

  10. #10
    Rik's Avatar
    Join Date
    Feb 2014
    Location
    Lancaster CA
    Posts
    78
    Post Thanks / Like

    Default Re: Landing gear fairing rubber channel

    I don't have a picture but to be clear it is the top fairing that is a couple of inches wide. It wraps around the leading and trailing edges. My airplane has been modified so much (probably normal) I have no idea whats correct

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •