Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
-
06-02-2022, 07:02 AM
#231
Administrator
Re: Bungee Installation
Merged your thread with another on the subject. Look at the first post with pictures.
Google searched:
Replacing bungees site:shortwingpipers.org
This helps keep all relative information in one thread so you don't have to search multiple threads to get all the information.
-
06-12-2022, 05:58 PM
#232
Re: Bungee Installation
I received a PM asking about my double 1080HD setup and if it has sagged at all. So far, it is holding tight. The airplane is apart right now awaiting engineering paperwork to fix my lift strut attach so it hasn’t flown as much as it usually would. But, I am very happy with the setup so far.
Jim
|
1957 PA-22/20 "Super Pacer" based 1H0
Lifetime EAA member
Vintage Aircraft Association member
Lifetime EAA Chapter 32 member |
-
06-13-2022, 12:33 PM
#233
Re: Bungee Installation
I reviewed this thread and was wondering what changes are needed for a PA-22/20? Should I leave it on the tail wheel or raise the tail? Engine hoist at prop or engine mount preferable? I need to remove the left gear for some work on it.
-
06-13-2022, 04:24 PM
#234
Re: Bungee Installation
I leave it on the tail and use the engine mount to lift the front.
Juergen
Pacer N3342Z
-
09-19-2022, 11:15 AM
#235
Re: Bungee Installation
Planning on installing two 1080 HD bungees on a 57 Tripacer with a 160, based on latest recommendations on this thread. Empty weight 1205 #. AC Spruce is out of stock.
Chief has1080 HD made to rigid government specifications by Thomas Taylor & Sons.
Univair has U31322-006 FAA-PMA.
Negligible price difference. Is one preferred over the other?
Thanks,
Jeff
-
09-19-2022, 06:05 PM
#236
Re: Bungee Installation
Originally Posted by
11304
Planning on installing two 1080 HD bungees on a 57 Tripacer with a 160, based on latest recommendations on this thread. Empty weight 1205 #. AC Spruce is out of stock.
Chief has1080 HD made to rigid government specifications by Thomas Taylor & Sons.
Univair has U31322-006 FAA-PMA.
Negligible price difference. Is one preferred over the other?
Thanks,
Jeff
They should all be manufactured to the same specification so there is probably no discernable difference from various suppliers.
They might all come from the same manufacturer and just be packaged/labeled differently for a particular seller.
I just checked websites, "Pilot Shop" and "Spruce" have the same image in their ad; "Aircraft Specialty" and "Chief" both show the same product from Superior.
I wouldn't worry about it.
Glen Geller
1955 PA22-150 "One For Papa!"
-
09-20-2022, 12:22 AM
#237
Re: Bungee Installation
Thanks Glenn, I did not know that Aircraft Specialty had them.
-
09-20-2022, 06:22 AM
#238
Administrator
Re: Bungee Installation
I just installed a set of 1080HDs from Univair.
-
09-20-2022, 06:33 AM
#239
Re: Bungee Installation
-
06-01-2023, 10:14 AM
#240
Re: Bungee Installation
Quick Question. I’m installing Bungees today because I found a broken one on one side . Which end of the hydrosorbs faces up ? The end with the larger circle steel or the smaller circle ?
circle ? IMG_9886.jpeg
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules