Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Likes Likes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: PA20 Parts Needed:

  1. 08-14-2009, 11:33 PM #1
    JoeB
    JoeB is offline
    JoeB's Avatar
    Join Date
    May 2009
    Location
    Atlanta, Georgia
    Posts
    366
    Post Thanks / Like

    Default PA20 Parts Needed:

    Hi SWPiper owners,

    Time to clean out your hangers to help me get this project flying again!
    Here's a partial list of what I need:

    - Cleveland 40-60 rim (or just the outer hub)
    - Brake Rotor

    - 0-290 engine mount
    - 0-290 prop (flying condition, wood or metal)

    And a wish list of stuff that might be easier to buy than try to repair...
    - Nose bowl
    - Lower cowling
    - Right metal wheel pant

    Thanks!
    Joe
    Reply With Quote Reply With Quote
    0 0
     
  2. 08-15-2009, 04:16 PM #2
    Lownslow
    Lownslow is offline
    Lownslow's Avatar
    Join Date
    May 2009
    Location
    Victoria, Texas
    Posts
    758
    Post Thanks / Like

    Default Re: PA20 Parts Needed:

    I have a nose bowl (front oil cooler design) that is good, having a minor crack repair from the starter hole. I believe it would clean up real well with a little TLC. I also have a 74DM 57 pitch propellor but would take a few days to get pics available since they are at another location. Let me know if you are interested and I will get pics,
    Reply With Quote Reply With Quote
    0 0
     
  3. 08-15-2009, 08:18 PM #3
    JoeB
    JoeB is offline
    JoeB's Avatar
    Join Date
    May 2009
    Location
    Atlanta, Georgia
    Posts
    366
    Post Thanks / Like

    Default Re: PA20 Parts Needed:

    Quote Originally Posted by Lownslow
    I have a nose bowl (front oil cooler design) that is good, having a minor crack repair from the starter hole. I believe it would clean up real well with a little TLC. I also have a 74DM 57 pitch propellor but would take a few days to get pics available since they are at another location. Let me know if you are interested and I will get pics,
    Thanks Lownslow, PM sent.
    Reply With Quote Reply With Quote
    0 0
     
  4. 09-15-2009, 10:08 AM #4
    snellbob
    snellbob is offline
    Join Date
    Aug 2009
    Location
    Houston
    Posts
    16
    Post Thanks / Like

    Default Re: PA20 Parts Needed:

    Joe:
    How about any master cylinders? I have a pair for sale...
    Bob
    Reply With Quote Reply With Quote
    0 0
     
  5. 09-15-2009, 07:35 PM #5
    JoeB
    JoeB is offline
    JoeB's Avatar
    Join Date
    May 2009
    Location
    Atlanta, Georgia
    Posts
    366
    Post Thanks / Like

    Default Re: PA20 Parts Needed:

    Quote Originally Posted by snellbob
    Joe:
    How about any master cylinders? I have a pair for sale...
    Bob
    As far as I know, my master cylinders are good. Won't know until parts start going on instead of taking them off!
    Shouldn't be to far down the road, engine is removed and soon will be apart for inspection (this could be a big deciding factor on repair time)
    Thanks,
    Joe
    Reply With Quote Reply With Quote
    0 0
     
  6. 09-15-2009, 09:13 PM #6
    Steve Pierce
    Steve Pierce is offline
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Graham, Texas, United States
    Posts
    15,476
    Post Thanks / Like
    Blog Entries
    1

    Default Re: PA20 Parts Needed:

    Got your gear legs today Joe. Gotta get some tubing and at least you can roll her around on her own legs.
    Steve Pierce

    Support Short Wing Pipers.org- Click Here To Find Out More.
    Reply With Quote Reply With Quote
    0 0
     
  7. 09-15-2009, 10:06 PM #7
    JoeB
    JoeB is offline
    JoeB's Avatar
    Join Date
    May 2009
    Location
    Atlanta, Georgia
    Posts
    366
    Post Thanks / Like

    Default Re: PA20 Parts Needed:

    Quote Originally Posted by Steve Pierce
    Got your gear legs today Joe. Gotta get some tubing and at least you can roll her around on her own legs.
    Now get off the internet forums and get to work Steve!

    Just kidding, take your time and enjoy your work. I'm hoping that your so proud of the finished product that you can't wait to show everyone how well they turned out!
    Thanks for the follow up
    Joe
    Reply With Quote Reply With Quote
    0 0
     
  8. 05-04-2011, 11:14 PM #8
    JoeB
    JoeB is offline
    JoeB's Avatar
    Join Date
    May 2009
    Location
    Atlanta, Georgia
    Posts
    366
    Post Thanks / Like

    Default

    Planning on installing a 150hp 0-320, looking for a low to mid-time firewall forward (the more complete the better).
    Please keep and eye and ear out at your local airport and let me know.
    Thanks!
    Joe
    Reply With Quote Reply With Quote
    0 0
     
  9. 05-05-2011, 11:18 AM #9
    SuperPacer
    SuperPacer is offline
    SuperPacer's Avatar
    Join Date
    Jan 2008
    Location
    Benson AZ, USA
    Posts
    414
    Post Thanks / Like

    Default

    Joe,
    I have an engine mount, O-320 engine (2500 hrs TT) cowl, nose bowl etc from my Pacer available. Just completed the Steve's Aircraft 180 Pacer STC, and will be parting out the "left overs". E-mail me at john.f.kobbeman@boeing.com for details if interested

    john
    Reply With Quote Reply With Quote
    0 0
     
  10. 05-05-2011, 07:20 PM #10
    JoeB
    JoeB is offline
    JoeB's Avatar
    Join Date
    May 2009
    Location
    Atlanta, Georgia
    Posts
    366
    Post Thanks / Like

    Default

    Thanks for the reply John, email sent with my phone # to discuss further
    -Joe
    Reply With Quote Reply With Quote
    0 0
     
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules