Piper Emblem On the Control Yoke

[Bender]

I have a source for yoke emblems like these if anyone interested. They are replicas and not duplicates. About .090/.100 thick, adhesive backed. Would put them on some .016 - .020 for rigidity.

Attachment 14858

How much are you selling these for?

[Southern Aero]

Bender

Normally $50 for a pair but $40 for anyone here. The pic below is just an example of a variant or two. Can be custom made to most any thing/color/image/logo one might want or need. The bottom one is an insert that is in an original emblem casting. You just have to remove the "embossed Piper" inside the casting........ the one on the yoke is the insert with the corroded casting cleaned up and painted black. The 3 above would replace the casting itself but the cavity under the emblem needs to be filled with a light weight filler and smoothed out level for the adhesive to stick.

Attachment 15105

Attachment 15106

[Southern Aero]

Hmmmmm, what does "invalid attachment" mean? ………..SJ, WTF? I'll try sticking them in here again...……

PiperYokeEmblem3.jpgPiperYokeEmblem4.jpg

[Broncoformudv]

Dang Southern Aero those are sharp looking!

[N2709P]

We have a set of the pot metal control wheel emblems and also a set of early sheet metal emblems. The pot metal emblems are being restored by brazing on new pins, rechroming and repainting them. The sheet metal emblems are in very good condition. Either could come with a set of fresh powder coated wheels. Not for sale but we would consider trading either set for a pair of 1955 TriPacer cowl emblems in serviceable condition.
N2709P

[N2709P]

What are they worth? I have a pair.

A pair you want to sell?

[mholton63]

A good friend of mine is getting ready to build some cast aluminum emblems. If you can't find them anywhere else, let me know and I'll let you know when they are ready.

I'm interested in a set of cast emblems. Can you please send me the contact or price and delivery. 1960 Tri-Pacer.

Thanks,