Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Thanks:
0
-
Re: Door Frame Corrosion
You can use 5/8" square 4130 tubing. It will slide into the door frame if one corner is ground away about an inch. I cut the door frame at 45 deg. TIG weld the corners. You may want to space out the surface with some aluminum.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules