Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Likes Likes:  0
Page 5 of 5 FirstFirst ... 345
Results 41 to 43 of 43

Thread: Aircraft refinishing, 101

  1. #41
    RobertC's Avatar
    Join Date
    Sep 2008
    Location
    Ashton,Idaho
    Posts
    259
    Post Thanks / Like

    Default Re: Aircraft refinishing, 101

    The key to refinishing with Stewart's will be the prep. Clean very well to remove all contaminates, oil, wax, etc, and then scuff well with Scotchbrite. If applied with fog coat/wet coat, it will be glossy.
    Last edited by RobertC; 04-04-2015 at 03:26 PM.

  2. #42
    Jim Hann's Avatar
    Join Date
    Mar 2013
    Location
    Ballwin (St. Louis), Missouri
    Posts
    1,609
    Post Thanks / Like

    Default Re: Aircraft refinishing, 101

    This is the airplane I was talking about. I saw it at Oshkosh, very nice job!

    http://www.shortwingpipers.org/forum...1-Finally-Done
    1957 PA-22/20 "Super Pacer" based 1H0
    Lifetime EAA member
    Vintage Aircraft Association member
    Lifetime EAA Chapter 32 member


  3. #43
    wmvosburgh's Avatar
    Join Date
    Feb 2017
    Posts
    104
    Post Thanks / Like

    Default Re: Aircraft refinishing, 101

    Regarding the two different HVLP guns available on the Stewarts website, what is the difference between cost? The finish line 4 and tecna polite i think are made by the same company, but the prolite comes with the digital pressure gauge?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •