Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
-
Re: Super Pacer no. 2
I'm currently still working on wing details. Getting flap and aileron brackets cleaned, rust protected and aligned, replacing drag wires and ribs. James Smith is making great progress on on my fuselage. I'll be away most of September hopefully I can pick the fuselage up when I return. I will have a couple weeks work welding in my stick, door frame and skylight mods. Before covering anything I will fit the wings and measure for the struts.
Does two part epoxy primer go over rattle can primers satisfactorily? I don't want my fuselage setting unprotected from rust while I'm working.
"You can only tie the record for flying low."
-
Re: Super Pacer no. 2
Originally Posted by
Subsonic
I'm going to start practicing rib stitching. For a hobby.
I use the Staggerwing knot.
"You can only tie the record for flying low."
-
Administrator
Re: Super Pacer no. 2
Originally Posted by
Stephen
Does two part epoxy primer go over rattle can primers satisfactorily? I don't want my fuselage setting unprotected from rust while I'm working.
Yes, we use a self etching spray can primer for temporary protection and then top coat with 2 part epoxy primer.
-
Re: Super Pacer no. 2
Why do you prefer the stag knot? Speed of the tie?
-
Re: Super Pacer no. 2
Originally Posted by
rsrguy3
Why do you prefer the stag knot? Speed of the tie?
Yes, I can tie it faster and I'm happy with the result.
"You can only tie the record for flying low."
-
Re: Super Pacer no. 2
I finally started trammeling the wings. 40 years ago, when Univair built these wings, someone messed up and offset one wing's aileron brackets 5/8" the wrong way. This took a bit of work to fix and reinforce. I'm leaving the country for the next three weeks. The engine got shipped yesterday off to LyCon. My new Airframes aluminum struts are on order.
"You can only tie the record for flying low."
-
Re: Super Pacer no. 2
Originally Posted by
Stephen
I finally started trammeling the wings. 40 years ago, when Univair built these wings, someone messed up and offset one wing's aileron brackets 5/8" the wrong way. This took a bit of work to fix and reinforce. I'm leaving the country for the next three weeks. The engine got shipped yesterday off to LyCon. My new Airframes aluminum struts are on order.
Stay home, that's why you are in this mess.
-
Re: Super Pacer no. 2
Originally Posted by
RobertC
Stay home, that's why you are in this mess.
Probably, good advice.
"You can only tie the record for flying low."
-
Re: Super Pacer no. 2
Originally Posted by
Steve Pierce
Yes, we use a self etching spray can primer for temporary protection and then top coat with 2 part epoxy primer.
I've been using Zinc Phosphate for my initial protection.
"You can only tie the record for flying low."
-
Re: Super Pacer no. 2
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules