Steve Pierce - Inspecting a PA-18 Super Cub LIVE tonight!

[sj]

Hey folks! He's not just a Shortwing guru! Much of this will apply to your aircraft too!

sj

[Steve Pierce]

Most of this discussion will transfer over from the long wings to the short. Nice thing about Piper is the commonality.

[FFSchooley]

Can’t wait to watch! Thanks Steve!

[Glen Geller]

Time? Link?
Bueller?

[FFSchooley]

Wow, this was such good info!!! I am at work and was learning and ton and really enjoying it and then some homeless people started a grass fire and interrupted Steve! Damn it. Thanks soo much Steve! I sure hope this is available on YouTube afterwards. Priceless info, so grateful! I do have a question from the broadcast..

the fittings that go into each end of the oil cooler that the oil lines then thread onto... I noticed thread sealant on them, going into the oil cooler. I just flushed my cooler and one of these fittings was loose. I cleaned and re-installed the fitting. Should I have used thread sealant? If so, what kind?

BC586D8C-7223-455E-A8CC-6A422A6BEAB7.jpg

[FFSchooley]

It’s over, but it’s now posted on YouTube to watch. Here is the link. Thanks again Steve!!!

https://youtu.be/xVT5MOw4aM0

[Old3pacer]

Excellent presentation last night! Your info was very good.
Thanks!
AL

[Steve Pierce]

the fittings that go into each end of the oil cooler that the oil lines then thread onto... I noticed thread sealant on them, going into the oil cooler. I just flushed my cooler and one of these fittings was loose. I cleaned and re-installed the fitting. Should I have used thread sealant? If so, what kind?

https://www.shortwingpipers.org/foru...itting-adapter

[FFSchooley]

Thanks Steve, I will give the aviation permatex a shot.

[Steve Pierce]

I updated that thread with my 2 favorite choices