Steve Pierce - Inspecting a PA-18 Super Cub LIVE tonight!
- Thread starter sj
- Start date
Graham, Texas, United States
Most of this discussion will transfer over from the long wings to the short. Nice thing about Piper is the commonality.
FFSchooley
Non-Member
Martinez, California
Can’t wait to watch! Thanks Steve!
Glen Geller
MEMBER
Beaverton, Oregon, United States
Time? Link?
Bueller?
Bueller?
FFSchooley
Non-Member
Martinez, California
Wow, this was such good info!!! I am at work and was learning and ton and really enjoying it and then some homeless people started a grass fire and interrupted Steve! Damn it. Thanks soo much Steve! I sure hope this is available on YouTube afterwards. Priceless info, so grateful! I do have a question from the broadcast..
the fittings that go into each end of the oil cooler that the oil lines then thread onto... I noticed thread sealant on them, going into the oil cooler. I just flushed my cooler and one of these fittings was loose. I cleaned and re-installed the fitting. Should I have used thread sealant? If so, what kind?
the fittings that go into each end of the oil cooler that the oil lines then thread onto... I noticed thread sealant on them, going into the oil cooler. I just flushed my cooler and one of these fittings was loose. I cleaned and re-installed the fitting. Should I have used thread sealant? If so, what kind?
Last edited:
FFSchooley
Non-Member
Martinez, California
It’s over, but it’s now posted on YouTube to watch. Here is the link. Thanks again Steve!!!
https://youtu.be/xVT5MOw4aM0
https://youtu.be/xVT5MOw4aM0
Graham, Texas, United States
FFSchooley
Non-Member
Martinez, California
Thanks Steve, I will give the aviation permatex a shot.
Graham, Texas, United States
I updated that thread with my 2 favorite choices
FFSchooley
Non-Member
Martinez, California
Hahaha! Neither of those is what I ordered. Oh well...
FFSchooley
Non-Member
Martinez, California
Steve! I checked my carb heat door like you showed to do and found that the knob was stopping it from closing all the way. So I fixed it, making sure the knob doesn’t seat all the way and the door closes perfectly. Thanks again!
Graham, Texas, United States
It took way longer than I thought it would. I have thousands of pictures to dig through, then I do a massive photo dump into one file and then organize them. I didn't know how long the talk would be, my prediction at this point is that this is about a quarter of the content. My hope is that everybody can take away something new and hopefully add to it.
Pacerfgoe
Non-Member
Salmon Arm BC
Thanks for doing this Steve and Steve, I've always wanted to be able to sit down and pic Steve's brain about the common things he runs into, and now you have brought it to my computer. Great way to spend an evening learning from the pro!
Thanks to you both and the others in the background pulling this together.
Thanks to you both and the others in the background pulling this together.
thebeerdedpilot
MEMBER
Mt Pleasant, WI
Excellent, can't wait for part 2!
Broncoformudv
Non-Member
Great job on this presentation Steve!
